background image

National Instruments, NI,  ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the 

Terms of Use

 section 

on

ni.com/legal

 for more information about National Instruments trademarks. Other product and company names mentioned herein are 

trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location: 

Help»Patents

 in your software, the 

patents.txt

 file on your CD, or 

ni.com/patents

.

© 2006 National Instruments Corporation. All rights reserved.

Technical Support

The 

NI GPIB-Serial Converter Help

 is available from the following locations:

Start»Programs»National Instruments»GPIB-Serial Converter

The NI GPIB-Serial Converter Wizard 

Help

 button

Refer to the 

Technical Support and Professional Services

 topic in the 

NI GPIB-Serial Converter Help

 for information about obtaining technical support 

for this product.

Summary of Contents for GPIB-RS232

Page 1: ...are for more information about troubleshooting problems configuring the hardware and software programming modes of operation and more Check the Hardware Configuration The GPIB RS232 485 422 is shipped with a 100 240 VAC wall mount or desktop power supply If you plan to use a different power source to power your GPIB RS232 485 422 verify that the voltage marked on that power supply matches the inpu...

Page 2: ... change any default setting you must install the NI GPIB Serial Converter software For more information about D Mode settings refer to the NI GPIB Serial Converter Help available after installing the software Install the Software To install the NI GPIB Serial Converter software complete the following steps 1 Log on as Administrator or as a user with administrator privileges 2 Insert the NI GPIB Se...

Page 3: ...age the unit Configure the Hardware To configure the hardware complete the following steps 1 Move the switch on the back panel to the CFG setting 2 Power on the GPIB RS232 485 422 using the power switch on the front of the product The PWR LED indicator should come on immediately The RDY LED indicator blinks green after the hardware has passed its power on self test indicating it is ready for confi...

Page 4: ...nts products refer to the appropriate location Help Patents in your software the patents txt file on your CD or ni com patents 2006 National Instruments Corporation All rights reserved Technical Support The NI GPIB Serial Converter Help is available from the following locations Start Programs National Instruments GPIB Serial Converter The NI GPIB Serial Converter Wizard Help button Refer to the Te...

Reviews: