manualshive.com logo in svg

National Instruments GPIB-ENET, Getting Started

Share
Download
National Instruments GPIB-ENET Getting Started Download Page 59

Hardware and Software Configuration Form

Record the settings and revisions of your hardware and software on the line to the right of each item. 
Complete a new copy of this form each time you revise your software or hardware configuration, and 
use this form as a reference for your current configuration. Completing this form accurately before 
contacting National Instruments for technical support helps our applications engineers answer your 
questions more efficiently.

National Instruments Products

GPIB-ENET Hardware Revision _____________________________________________________

10Base-T or Coax Version  __________________________________________________________

AC Input Voltage (100-120 V or 220-240 V)____________________________________________

DIP Switch Settings _______________________________________________________________

Ethernet Port Configuration Slide Switch Setting_________________________________________

IP Address _______________________________________________________________________

READY LED Signaling Status Code __________________________________________________

GPIB Software for Windows 95/98 Version Number on Disk  ______________________________

Programming Language Interface Version ______________________________________________

Diagnostic Utility Results ___________________________________________________________

Other Products

Resource Summary Report from the Device Manager

To create this report, first display the System Properties dialog box for the computer by 
double-clicking on the System icon under Start»Settings»Control Panel. Then click on the Device 
Manager tab and highlight the Computer icon. Click on the Print button, and check the Print to file 
checkbox in the Print dialog box before clicking on OK.

_______________________________________________________________________________

_______________________________________________________________________________

Programming Environment Information

Programming Language _________       Compiler Vendor _________       Compiler Version _________

Application Information

DOS Application _________         Win16 Application _________          Win32 Application _________

If Win16 or Win32, method of accessing DLL (link with language interface or direct entry?)

________________________________________________________________________________

Summary of Contents for GPIB-ENET































































Reviews:

No comments

Brands by name

Popular brands

Load more brands