Chapter 2
Installation and Configuration
2-8
©
National Instruments Corporation
Figure 2-6. Network Settings Tab
The Network Settings tab also provides access to the three GPIB-ENET
support utilities: Firmware Update, Assign IP Address, and Assign
Subnet Information. To run any of these utilities, click on the
corresponding button for that utility. Each utility includes built-in,
context-sensitive online help.
Configure the Device Templates
If you want to examine or modify the logical device templates for the
GPIB software, double-click on the System icon under
Start»Settings»Control Panel. In the System Properties dialog box that
appears, select the Device Manager tab, click on the View devices by
type button at the top of the tab, scroll down to the National
Instruments GPIB Interfaces icon, and click on the Properties button.
Select the Device Templates tab to view the logical device templates, as
shown in Figure 2-7.
