National Instruments Gigabit Ethernet Adapters Installation Manual Download

Page: 5 / 17

National Instruments Corporation

PCI/PXI Gigabit Ethernet Adapters Installation Guide

Install the Windows Me/98 Ethernet drivers.

Windows Me

Windows automatically detects the new hardware and displays an

Add

New Hardware Wizard

window, as shown in the following figure.

Insert the

PCI/PXI Gigabit Ethernet Adapters

CD-ROM and follow

the instructions presented. Choose the

Recommended

options when

given a choice and click

Next

Windows 98

Windows automatically detects the new hardware and displays an

Add

New Hardware Wizard

window, as shown in the following figure.

Insert the

PCI/PXI Gigabit Ethernet Adapters

CD-ROM and follow

the instructions presented. Choose the

Recommended

options when

given a choice and click

Next

Summary of Contents for Gigabit Ethernet Adapters


















Search results

Summary of Contents for Gigabit Ethernet Adapters

Reviews:

Related manuals for Gigabit Ethernet Adapters

Brands by name

Popular brands

National Instruments Gigabit Ethernet Adapters, Installation Manual

Search results

Summary of Contents for Gigabit Ethernet Adapters

Reviews:

Related manuals for Gigabit Ethernet Adapters

Brands by name

Popular brands