National Instruments FlexRIO NI 6581B Getting Started Manual Download

Page: 18 / 22

Ground yourself with a grounding strap or touch a grounded metal surface.

Unlatch the module by pushing down on the ejector handle.

Hold the module by the ejector handle and remove it from the slot.

Store the module in the original antistatic packaging when not in use to avoid damage.

Environment

............................................................................

Maximum altitude

2,000 m (800 mbar) (at 25 °C ambient
temperature)

............................................................................

Pollution Degree

Indoor use only.

Operating Environment

............................................................................

Ambient temperature range

0 °C to 55 °C (Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2.)

............................................................................

Relative humidity range

10% to 90%, noncondensing (Tested in
accordance with IEC-60068-2-56.)

Storage Environment

............................................................................

Ambient temperature range

-20 °C to 70 °C (Tested in accordance
with IEC-60068-2-1 and IEC-60068-2-2.)

............................................................................

Relative humidity range

5% to 95%, noncondensing (Tested in
accordance with IEC-60068-2-56.)

Shock and Vibration

............................................................................

Operating shock

30 g peak, half-sine, 11 ms pulse (Tested in
accordance with IEC-60068-2-27. Meets
MIL-PRF-28800F Class 2 limits.)

Random vibration

....................................................................

Operating

5 Hz to 500 Hz, 0.3 g

rms

....................................................................

Nonoperating

5 Hz to 500 Hz, 2.4 g

rms

(Tested in accordance

with IEC-60068-2-64. Nonoperating test
profile exceeds the requirements of
MIL-PRF-28800F, Class 3.)

ni.com

NI 6581/6581B Getting Started Guide

Summary of Contents for FlexRIO NI 6581B























Search results

Summary of Contents for FlexRIO NI 6581B

Reviews:

Related manuals for FlexRIO NI 6581B

Brands by name

Popular brands

National Instruments FlexRIO NI 6581B, Getting Started Manual

Search results

Summary of Contents for FlexRIO NI 6581B

Reviews:

Related manuals for FlexRIO NI 6581B

Brands by name

Popular brands