Chapter 3
Hardware and Software Configuration
©
National Instruments Corporation
3-9
FieldPoint FP-1600 User Manual
Set FP-1600 Properties
1.
After you have selected the Device Properties button from the
Network Devices window, the FP-1600 Properties window appears,
as shown in Figure 3-6.
Figure 3-6.
Device Properties Window
2.
In the FP-1600 Properties window, enter the Ethernet parameters
you have chosen for the IP address, subnet mask, gateway IP, DNS
server IP, and Time Server IP. You can also click on Suggest Values to
let the software provide default parameters. If you have more than one
FP-1600, you can enter a comment to help you identify each device.
To configure the device, click on OK.
Note
Suggest Values might provide settings that do not work with your network.
3.
When the FP-1600 reappears in the Network Devices window with its
own IP address, it is ready to use. Click on the IP Address, then click
on Select.
