©
National Instruments Corporation
11
cFP-1808 Quick Start Guide
The switch settings determine the baud rate when the cFP-1808 is powered on. If
you change the switch settings while the cFP-1808 is on, you must turn it off, then
on again, to apply the new settings and change the baud rate.
The serial interface on the cFP-1808 always uses the following parameters: 1 start
bit, 8 data bits, 1 stop bit, and no parity.
19,200
57,600
38,400
115,200
Table 1.
DIP Switch Positions and Corresponding Serial Baud Rates (Continued)
DIP Switches 3–5
Serial Baud Rate
DIP Switches 3–5
Serial Baud Rate
1
234
5
ON
1
234
5
ON
1
234
5
ON
1
234
5
ON
Summary of Contents for FieldPoint cFP-1808
Page 1: ...cFP 1808 ...
