Powering Up the NI ELVIS RIO CM
1.
Install required software from the NI LabVIEW 2016 ELVIS RIO Control Software
Bundle DVD.
2.
Connect the NI ELVIS RIO CM to the NI ELVIS II Series Workstation. Refer to the
Installing the NI ELVIS RIO CM
section for more information.
3.
Connect the USB Device Port on the NI ELVIS RIO CM to the computer with the USB
cable.
4.
Turn on the Workstation Power Switch to power up the NI ELVIS II Series Workstation.
NI ELVIS RIO CM Getting Started Guide
|
© National Instruments
|
5
