1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Never touch the exposed pins of connectors.
Note
Do not install a device if it appears damaged in any way.
3.
Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the NI ELVIS RIO CM kit.
Figure 1. NI ELVIS RIO CM Kit Contents
3
2
4
5
1
1. NI ELVIS RIO CM Device
2. NI LabVIEW 2016 ELVIS RIO Control Software
Bundle
3. Getting Started Guide
4. M4 Mounting Screw (x4)
5. USB 2.0 A-to-B (Angled) Cable
Installing the NI ELVIS RIO CM
What to Use
•
Hardware
–
NI ELVIS II Series Workstation
–
NI ELVIS II Series AC/DC power supply
–
USB 2.0 A-to-B (Angled) Cable
–
M4 mounting screws
–
Computer
•
Software
–
NI LabVIEW 2016 ELVIS RIO Control Software Bundle
•
Tools
–
Screwdriver, Phillips #1
NI ELVIS RIO CM Getting Started Guide
|
© National Instruments
|
3
