©
National Instruments Corporation
7-1
7
SC-2055
This chapter describes the SC-2055 adapter in detail, including function,
connection, mounting, and cabling. Refer to Chapter 10,
to install and use your adapter.
The SC-2055 converts the DAQCard-700 and PC-LPM-16/PnP I/O
connector signals to standard pin connections for signal conditioning
accessories. See Table 1-1 for a complete list of DAQ devices that you can
use with the SC-2055.
Figure 7-1 shows the SC-2055 parts locator diagram.
Figure 7-1.
SC-2055 Parts Locator Diagram
1
Shield Jumper
2
PC-LPM-16/PnP or DAQCard-700
3
To CB-50 or SC-2702
4
Serial Number
5
Assembly Number and Revision Letter
6
Product Name
1
2
3
4
5
6
