Verifying the Kit Contents
Verify that the following items are included in the cRIO-9034 kit.
Figure 1.
cRIO-9034 Kit Contents
2
5
4
3
1
1. cRIO Device with Power Connector and SD Card
Slot Cover
2. USB A-to-B Cable
3. Ferrite (x2)
4. NI-RIO Device Drivers Media
5. Getting Started Guide
Installing Software on the Host Computer
Before using the cRIO-9034, you must install the following application software and device
drivers on the host computer in this order:
1.
LabVIEW 2014 or later
2.
LabVIEW Real-Time Module 2014 or later
3.
LabVIEW FPGA Module 2014 or later
1
4.
NI-RIO Device Drivers August 2014 or later
For minimum software support information, visit
swsupport
.
Installing C Series Modules
Complete the following steps to install a C Series module.
1
LabVIEW FPGA Module is not required when using Scan Interface mode. To program the user-
accessible FPGA on the cRIO-9034, LabVIEW FPGA Module is required.
NI cRIO-9034 Getting Started Guide
|
© National Instruments
|
5
