Caution
You must use the SD card slot cover to protect the SD card in hazardous
locations.
Caution
Do not insert or remove SD cards unless power has been switched off or
the area is known to be nonhazardous.
Note
Using SD cards that are not approved by NI might invalidate specifications
and result in unreliable performance.
The following accessories are available for the SD card slot.
Table 6. cRIO-9033 SD Storage Accessories
SD Card
Capacity
Part Number
SD Industrial Storage Card
16 GB
783658-01
32 GB
783659-01
SD Door (x3)
—
783660-01
Related Information
File System
on page 21
SD Card Slot Cover
You must use the SD card slot cover to protect the SD card in hazardous locations. Do not
remove an SD card while either LED is flashing or lit because file corruption may result.
Note
Screw the slot cover closed completely. Tighten the captive screws to a
maximum torque of 0.75 N · m (6.7 lb · in.) using a #1 Phillips screwdriver. Do not
overtighten.
RS-232 Serial Port
The cRIO-9033 has an RS-232 serial port that is implemented with an RJ-50, 10-position
modular jack to which you can connect devices such as displays or input devices. Use the
Serial VIs to read from and write to the serial port. Refer to the
LabVIEW Help
for information
about the Serial VIs.
Find examples on how to use NI-Serial or NI-VISA to perform serial communication in the
NI Example Finder. The NI Example Finder is located on the Help menu in the
LabVIEW
Help
.
Note
The RS-232 serial port cannot be accessed by the user application when the
Console Out startup option is enabled.
The following table shows the pinout for the RS-232 serial port.
NI cRIO-9033 User Manual
|
© National Instruments
|
9
