Mounting the cRIO-9033 on a Panel
You can use the NI panel mounting kit to mount the cRIO-9033 on a panel.
What to Use
•
cRIO-9033
•
Screwdriver, Phillips #2
•
NI panel mounting kit, 157253-01
–
Panel mounting plate
–
M4 x 10 screws (x4)
What to Do
Complete the following steps to mount the cRIO-9033 on a panel.
1
3
2
1.
Align the cRIO-9033 and the panel mount plate.
2.
Fasten the panel mounting plate to the cRIO-9033 using the screwdriver and M4 x 10
screws. Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).
You must use the screws provided with the NI panel mounting kit because they are the
correct depth and thread for the panel mounting plate.
3.
Fasten the panel mounting plate to the surface using the screwdriver and screws that are
appropriate for the surface. The maximum screw size is M5 or number 10.
Panel Mounting Dimensions
The following figure shows the panel mounting dimensions for the cRIO-9033.
NI cRIO-9033 User Manual
|
© National Instruments
|
29
