cRIO-9263 Operating Instructions
14
ni.com
Physical Characteristics
If you need to clean the module, wipe it with a dry towel.
Screw-terminal wiring ...................... 12 to 24 AWG copper
conductor wire with 10 mm
(0.39 in.) of insulation
stripped from the end
Torque for screw terminals ............... 0.5 to 0.6 N · m
(4.4 to 5.3 lb · in.)
Weight............................................... Approx. 150 g (5.3 oz)
Safety
Safety Voltages
Channel-to-COM
..............................±
11 V max,
Installation Category I
Installation Category I is for measurements performed on circuits
not directly connected to the electrical distribution system referred
to as
MAINS
voltage. MAINS is a hazardous live electrical supply
system that powers equipment. This category is for measurements
of voltages from specially protected secondary circuits. Such
voltage measurements include signal levels, special equipment,
