Chapter 4
LabVIEW Real-Time Programming
cFP-21xx and cFP-BP-x User Manual
4-10
ni.com
If you select
Small target with external file for subVIs
in
the Build
Options pane, you cannot change the
LLB for other files
path because this
path is determined from the
Application Path
setting in
Network
Options
. Refer to the
LabVIEW Help
for more information about the
Small
target with external file for subVIs
option. Refer to the
section for more information about accessing and using
RT
Target Options
.
Source Files and VI Settings Tabs
Use the
Source Files
and
VI Settings
tabs the same way you do to build a
LabVIEW Real-Time application when LabVIEW Real-Time is targeted to
the host PC. Refer to the
LabVIEW Help
for more information about the
Source Files
and
VI Settings
tabs.
Application Settings and Installer Settings Tabs
The
Application Settings
and
Installer Settings
tabs are disabled when
you target LabVIEW Real-Time to the cFP-21
xx
because these settings do
not apply to applications embedded on the controller.
Launching Embedded Applications at Startup
The Real-Time Engine can launch your embedded application each time
you start up the cFP-21
xx
. Complete the following steps to launch the
embedded application each time the cFP-21
xx
starts up:
1.
Target LabVIEW Real-Time to the cFP-21
xx
. Refer to the
LabVIEW Real-Time to the cFP-21xx
about targeting LabVIEW Real-Time to the cFP-21
xx
.
2.
Select
Tools»RT Target Options
.
3.
Select
RT Target: Miscellaneous
from the pull-down menu.
4.
Select
Launch Application at Boot-up
.
5.
Click
OK
.
