![background image](http://html1.mh-extra.com/html/national-instruments/cfp-ai-102/cfp-ai-102_user-manual_709156003.webp)
FP-AI-102 and cFP-AI-102
2
ni.com
To install the FP-AI-102, refer to Figure 1 and complete the
following steps:
1. Slide the terminal base key to either position X (used for any
module) or position 1 (used for the FP-AI-102 module).
2. Align the FP-AI-102 alignment slots with the guide rails on the
terminal base.
3. Press firmly to seat the FP-AI-102 on the terminal base. When
the module is firmly seated, the terminal base latch locks it into
place.
Figure 1.
Installing the FP-AI-102
Installing the cFP-AI-102
The cFP-AI-102 mounts on a Compact FieldPoint backplane
(cFP-BP-
x
). Hot plug-and-play enables you to install the
cFP-AI-102 onto a powered backplane without disturbing the
operation of other modules or connector blocks. The cFP-AI-102
receives operating power from the backplane.
To install the cFP-AI-102, refer to Figure 2 and complete the
following steps:
1. Align the captive screws on the cFP-AI-102 with the holes on
the backplane. The alignment keys on the cFP-AI-102 prevent
backward insertion.
2. Press firmly to seat the cFP-AI-102 on the backplane.
3. Using a number 2 Phillips screwdriver with a shank of at least
64 mm (2.5 in.) length, tighten the captive screws to 1.1 N
⋅
m
(10 lb
⋅
in.) of torque. The nylon coating on the screws prevents
them from loosening.
Alignment
Slot
Key
Latch
Guide Rails
Terminal Base
I/O Module