5
Rail-Mount Bracket
Figure 5. Inserting the Rail-Mount Bracket
Replace the end of the connector block and push very firmly until it snaps into place.
Repeat for the other side, making sure that both rail-mount brackets are facing the
same direction.
Slide the rail-mount brackets of the connector block onto your rails.
5. Plug the free end of the ribbon cable into the connector block. Align the tabs and arrows as
shown in Figure 6.
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49
Align Arrows
Align Keying Tabs
Figure 6. Cable Connections to the CB-50
