4
4. If you plan to mount your connector block for stability, choose one of the following
procedures for mounting. If you do not want to mount your connector blocks, proceed to
step 5.
•
For flush mounting, insert the flush-mount brackets into the connector block base as
shown in Figure 3.
Flush-Mount Bracket
Figure 3. Inserting the Flush-Mount Brackets
Place the connector block where you want to mount it and screw it into place.
•
For rail mounting, pry off the right and left ends of the connector block with a
screwdriver as shown in Figure 4.
Figure 4. Removing the Connector Block Ends
Insert the rail-mount bracket into the slots on the bottom of the connector block as
shown in Figure 5.
