BNC-2115 Installation Guide
2
ni.com
For detailed specifications for the BNC-2115, refer to the
Specifications
section.
Caution
Do
not
connect the BNC-2115 to any device other than the National Instruments
devices listed previously. Doing so can damage the BNC-2115, the DAQ device, or the host
computer. National Instruments is
not
liable for damage resulting from these connections.
Installing the BNC-2115
To connect the BNC-2115 to your DAQ device, refer to Figure 1 as you
complete the following steps. Consult your computer user manual or
technical reference manual for specific instructions and warnings.
Note
If you have not already installed your DAQ device, refer to the
DAQ Quick Start
Guide
for instructions.
Figure 1.
Connecting the BNC-2115 to Your DAQ Device
1
BNC-2115
2
SH1006868 Cable
3
DAQ Device
4
Personal Computer
+
_
+
FLO
ATIN
G
SO
UR
CE (
FS)
GR
OU
ND
RE
F .
SO
UR
CE (G
S)
ANALOG INPUT DIGIT
AL I
/O
AISENSE PB3
AIGND DGND
1
4
3
2
