RTM-3661 Front Panel
Figure 14. RTM-3661 Front Panel
D
D
5-8
5-8
1-4
1-4
C
C
5-8
5-8
1-4
1-4
B
B
5-8
5-8
1-4
1-4
A
A
5-8
5-8
1-4
1-4
PCIe D
PCIe D
00
11
PCIe C
PCIe C
00
11
PCIe B
PCIe B
00
11
PCIe A
PCIe A
00
11
RTM-3661
Rear Transition Module for ATCA
Designed by BEEcube
Designed by BEEcube
Caution
To avoid permanent damage to the ATCA-3671, disconnect all signals
connected to the ATCA-3671 before powering down the module, and connect
signals only after the ATCA-3671 has powered on.
Caution
Connections that exceed any of the maximum ratings of any connector on
the ATCA-3671 can damage the device and the chassis. NI is not liable for any
damage resulting from such connections.
ATCA Compatibility vs. Compliance
The ATCA-3671 achieves mechanical and electrical compatibility with the ATCA (Advanced
Telecommunications Computing Architecture) 3.0 specification, and it is intended for use with
an ATCA 3.0-compliant Shelf. However, the ATCA-3671 is not a fully compliant Front Board
implementation. For example, it does not support hardware platform management from a Shelf
Manager. In addition, while it implements functions for Ethernet on the Base Interface and
clocks on the Synchronization Clock Interface, it does not support Electronic Keying.
Troubleshooting
If an issue persists after you complete a troubleshooting procedure, contact NI technical
support or visit
Should I Update Device Firmware and FPGA Images?
ATCA-3671 devices ship with firmware and FPGA images compatible with NI ATCA FPGA
Modules driver software.
You may need to update the device for compatibility with the latest version of the software.
Why Doesn't the Device Power On?
•
Verify that the power supply is functional by substituting a different adapter.
•
Verify that the power switch on the front of the device is engaged.
ATCA-3671 Getting Started Guide
|
© National Instruments
|
23