manualshive.com logo in svg

National Instruments AT-MIO-16D, User Manual, Page: 263 / 291

Share
Download
National Instruments AT-MIO-16D User Manual Download Page 263

Technical Support Form

                                                                                                                                                                                           

 

Photocopy this form and update it each time you make changes to your software or hardware, and use the completed
copy of this form as a reference for your current configuration.  Completing this form accurately before contacting
National Instruments for technical support helps our applications engineers answer your questions more efficiently.

If you are using any National Instruments hardware or software products related to this problem, include the
configuration forms from their user manuals.  Include additional pages if necessary.

Name                                                                                                                                                                                 

 

Company                                                                                                                                                                            

 

Address

                                                                                                                                                                           

 

                                                                                                                                                                           

 

Fax (       

 

 )                                                            

 Phone ( 

      

 

 )                                                                              

 

Computer brand                                            

 Model

                                      

 Processor                                     

 

Operating system

                                                                                                                                                     

 

Speed                               

 MHz

RAM                               

 MB

Display 

adapter                                   

 

Mouse                      

 yes

                   

 

no

Other adapters installed                                                       

 

Hard disk capacity                                 

 MB

Brand                                                                                       

 

Instruments used                                                                                                                                                        

 

National Instruments hardware product model                                     

 Revision

                                                

 

Configuration

                                                                                                                                                           

 

National Instruments software product                                               

 Version                                                   

 

Configuration

                                                                                                                                                           

 

The problem is

                                                                                                                                                                

 

                                                                                                                                                                                             

 

                                                                                                                                                                                             

 

                                                                                                                                                                                             

 

                                                                                                                                                                                             

 

List any error messages                                                                                                                                                     

 

                                                                                                                                                                                             

 

                                                                                                                                                                                             

 

                                                                                                                                                                                             

 

                                                                                                                                                                                             

 

The following steps will reproduce the problem                                                                                                               

 

                                                                                                                                                                                             

 

                                                                                                                                                                                             

 

                                                                                                                                                                                             

 

Summary of Contents for AT-MIO-16D




































































































































































































































































































Reviews:

No comments