INSTALLATION GUIDE
NI 9921/9922 Outdoor IP Enclosure
For NI WLS-9000 Series Devices
This guide describes how to install and use the National Instruments 9921 and
National Instruments 9922 outdoor IP enclosures. The NI 9921/9922 outdoor IP enclosures are
accessories that provide NI WLS-9000 Series devices with a minimum ingress protection (IP) rating
of IP54 against dust or water in harsh outdoor or industrial environments.
Figure 1 shows the NI 9921/9922 outdoor IP enclosure components.
Figure 1.
NI 9921/9922 Outdoor IP Enclosure Components
Note
You need a #1 and #2 Phillips and a #1 flat screwdriver to install the NI 9921/9922.
For more information about IP ratings, refer to the
section. For the
NI WLS-9000 Series device specifications, refer to the
NI WLS/ENET-9163 User Guide and
Specifications
available at
ni.com/manuals
.
1
IP Sleeve
2
Antenna
3
IP Boot
4
DIN Rail Mounting Clip
5
Glands/Gaskets
6
M12 Trigger Connector (NI 9922 Only)
7
M12 Power Connector
8
Ethernet Connector (NI 9922 Only)
2
4
3
1
8
6
5
7