background image

USER FPGA LEDs

You can use the bi-color, yellow and green USER FPGA LEDs to help debug your application
or easily retrieve application status. Use the LabVIEW FPGA Module and NI-RIO software to
define the USER FPGA LEDs to meet the needs of your application. Refer to 

LabVIEW Help

for information about programming these LEDs.

Chassis Grounding Screw

The NI 9155 provides a chassis grounding screw.

7

6

5

4

3

2

1

8

1

NO FPGA APP

USER FPGA1

USER FPGA2

USER FPGA3

POWER

USER FPGA1

USER FPGA2

USER FPGA3

INPUT

9-30 V

25W MAX

LINK

LINK

UPS

TREAM

DO

WNS

TREAM

DO NO

T SEP

ARA

TE CABLES WHEN

ENERGIZED IN HAZARDOUS L

OCA

TIONS

MXI-Express RIO

NI 9155

1. Chassis Grounding Screw

For EMC compliance, you must connect the NI 9155 to earth ground through the chassis
ground screw. Use wire that is 2.05 mm

2

 (12 AWG) solid copper wire with a maximum length

of 1.5 m (5 ft). Attach the wire to the earth ground of the electrode system of the facility.

Caution

 

If you use shielded cabling to connect to a C Series module with a plastic

connector, you must attach the cable shield to the chassis grounding terminal using
1.3 mm diameter (16 AWG) or larger wire. Attach a ring lug to the wire and attach
the wire to the chassis grounding terminal. Solder the other end of the wire to the
cable shield. Use shorter wire for better EMC performance.

For more information about ground connections, visit 

ni.com/info

 and enter the Info Code

emcground

.

Mounting the Device

To obtain the maximum allowable ambient temperature of 55 °C, you must mount the NI 9155
horizontally on a 35-mm DIN rail or a flat, metallic, vertical surface such as a panel or wall.
You can mount the NI 9155 directly to the surface or use the NI Panel Mounting Kit. The
following figure shows the NI 9155 mounted horizontally. Mounting the NI 9155 in other
orientations or on a nonmetallic surface can reduce the maximum allowable ambient
temperature and can affect the typical accuracy of modules in the NI 9155.

6

  | 

ni.com

  | 

NI 9155 User Manual

Summary of Contents for 9155















Reviews: