NI 5762R User Guide and Specifications
The NI 5762 is a two-channel, 250 MS/s, 16-bit high-speed digitizer adapter module designed to work
in conjunction with your NI FlexRIO
™
FPGA module. The NI 5762 is available in these two versions:
•
NI 5762 (-01): Single-ended, AC-coupled with a 100 MHz elliptic filter
•
NI 5762 (-02): Single-ended, AC-coupled, ideal for undersampling applications
Read the white labels on the side of your device to determine which version of the NI 5762 you are
using. This document contains signal information and specifications for the NI 5762R, which is
composed of an NI FlexRIO FPGA module and the NI 5762. This document also contains tutorial
sections that demonstrate how to acquire data using a LabVIEW FPGA example VI and how to create
and run your own LabVIEW project with the NI 5762R.
Contents
Electromagnetic Compatibility Guidelines.......................................................................................... 2
How to Use Your NI FlexRIO Documentation Set ............................................................................. 3
Front Panel and Connector Pinouts ..................................................................................................... 4
Block Diagram ..................................................................................................................................... 6
NI 5762 Component-Level Intellectual Property (CLIP) .................................................................... 7
Cables................................................................................................................................................... 9
Clocking............................................................................................................................................... 9
Using Your NI 5762R with a LabVIEW FPGA Example VI.............................................................. 9
Creating a LabVIEW Project and Running a VI on an FPGA Target ................................................. 11
Specifications....................................................................................................................................... 15
Where to Go for Support ..................................................................................................................... 24
Appendix: Installing EMI Controls ..................................................................................................... 25
Note
Before configuring your NI 5762R, you must install the appropriate software and hardware.
Refer to the
NI FlexRIO FPGA Module Installation Guide and Specifications
for installation
instructions. Figure 1 shows an example of a properly connected NI FlexRIO device.
Figure 1.
NI FlexRIO Device
Note
NI 5762R
refers to the combination of your NI 5762 adapter module and your NI FlexRIO
FPGA module.
NI 5762
refers to your NI 5762 adapter module only.
NI FlexRIO
Adapter Module
+
=
NI FlexRIO Device
NI FlexRIO
FPGA Module
