NI 5762R User Guide and Specifications
4
ni.com
Front Panel and Connector Pinouts
Table 2 shows the front panel connectors and signal descriptions for both versions of the NI 5762. Refer
to the
section of this document for additional signal information.
Caution
To avoid permanent damage to the NI 5762, disconnect all signals connected to the NI 5762
before powering down the module, and connect signals only after the adapter module has been
powered on by the NI FlexRIO FPGA module.
Caution
Connections that exceed any of the maximum ratings of any connector on the NI 5762R
can damage the device and the chassis. NI is
not
liable for any damage resulting from such signal
connections. For the maximum input and output ratings for each signal, refer to the
section of this document.
Table 2.
NI 5762 Front Panel Connectors
Device Front Panel
Connector
Signal Description
AI 0
Single-ended analog input channel 0.
TRIG
External trigger input.
CLK IN
*
Reference or external clock input.
AI 1
Single-ended analog input channel 1.
AUX I/O
Refer to Table 3 for the signal list and descriptions.
* When not using an external Sample clock or the Reference clock, terminate the CLK IN input connector with a 50
Ω
terminator. Failing to terminate the CLK IN connector may negatively impact the jitter performance of the NI 5762.
AI
0
TRIG
CLK IN
AI
1
AUX
I/O
NI 5762
INSTRUMENTS
NATIONAL
250 MS/s
Digitizer
