GENERAL INFORMATION
Charging can be done on-board or externally of the machine. The charger is fully automatic. The input and output of the charger is microproces
-
sor controlled. The output is current limited for the protection of your equipment.
Note:
For optimal battery life, wait one hour for power packs to cool after use before connecting to charger.
Note:
For optimal battery life, charge at an ambient temperature of 64
°
F - 86
°
F (18°C - 30°C).
Note:
To avoid premature failure of the charger, make sure to operate in a well ventilated area.
CAUTION:
THIS CHARGER IS DESIGNED ONLY TO BE USED WITH NATIONAL’S #5204 EXTENDED RUN POWER PACKS. DO NOT
USE THIS CHARGER WITH THE #5203 LIFT-OUT STYLE POWER PACKS OR ANY OTHER BATTERIES. FAILURE TO FOLLOW THIS
WARNING MY CAUSE DAMAGE TO CHARGER, BATTERIES AND/OR PERSONAL INJURY AND WILL VOID ALL WARRANTIES.
Charging
4
ON-BOARD CHARGING
EXTERNAL CHARGING
Summary of Contents for 404062
Page 1: ...Read Manual Before Operating 404076 Rev A 404062 48 VOLT CHARGER INSTRUCTION MANUAL...
Page 2: ......
Page 6: ......
Page 7: ......