Safety
Fax: 763-535-8255
9
ORGANIZATIONAL MEASURES
In addition to the instruction manual, general and legal regulations regarding accident prevention and environmental protection must be with and
indicated every time.
Such duties may relate to the handling of hazardous substances, to the provision and wearing of personal protection equipment or compliance
with local traffic regulations.
The instruction manual must be supplemented by instructions that include the duty to supervise and report relating to particular local working
practices for example work organization, work procedures and personnel allocation.
Personnel entrusted with working with the machine must have read the instruction manual before starting the work, in particular the chapter
about Safety. These have to be done before starting any work with the machine. This particularly applies to incidental activities such as setting
up the machine, carrying out maintenance work or training staff to work with the machine.
From time to time the working practices of the staff are to be checked regarding awareness of safety and hazards.
Personnel must tie back long hair and not wear loose clothing or jewelery rings. There is a risk of injury through getting stuck or being drawn
into moving machinery.
Spare parts must always comply with the technical requirements and the specification of the manufacturer.This is always guaranteed with
original spare parts of the manufacturer.
Inspection intervals and intervals for recurring checks specified in these operating instructions must be complied with. At the same time it is
necessary to meet the legal requirements.
To perform maintenance work correctly it is important to be equipped with proper tools for the task in question.
The location and the operation of fire extinguishers must be made known on each building site.
PERSONNEL QUALIFICATION
• Only reliable and trained personnel should work on the machine.
• Only trained personnel should operate the machine. Note the statutory minimum age. Clearly specify the responsibilities of personnel for
operation, set up, service and maintenance work.
• Make sure that only authorized personnel operate or work on the machine.
•
Clearly designate the machine operator. Define his responsibilities and empower him to decline instructions from third parties which are
not complying with the safety requirements.
• Personnel being trained or made acquainted with the equipment may only be deployed under constant supervision of an experienced
operator or trainer.
SAFETY PRECAUTIONS
• Avoid any method of working that impairs safety.
• All precautions have to be taken to ensure that the machine will only be used in a safe and functional status.
•
The machine has to be checked visually at least once a day for any damage and/or defect.
•
In the event of operational malfunctions the machine must be shut down immediately and secured. The fault must be rectified before start
-
ing the machine again.
WARNING:
THE PRODUCT MANUALS ARE TO BE KEPT WITH THE MACHINE AND MUST BE ACCESSIBLE AT ALL TIMES.
WARNING:
CHANGES, ADD-ONS OR CONVERSIONS TO THE MACHINE WHICH MIGHT INFLUENCE THE SAFETY OF THE MACHINE
MUST NOT BE UNDERTAKEN WITHOUT THE PERMISSION OF THE MANUFACTURER.
Summary of Contents for 3472
Page 2: ......
