National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / [email protected]
©2019 National Cycle, Inc.
Page 2 of 4
10-118578-000 09/19
4. Remove left and right Outer Covers.
Fig 3
5. Remove the four screws and washers holding
the OEM shield in place.
(5mm Hex Wrench)
Fig 4
6. Remove the OEM Windshield
Remove the OEM Windshield Mount Arm
7.Loosen the Screws holding the OEM arm
(5mm Hex Wrench) Fig 5
8. Move mount arm forward and downward to
remove from bracket (a)
Remove the OEM Internal Bolt Plate
9. Remove the internal bolt plate.
Fig 6
Plate is directional. Keep the left and right
separate.
Fig 4
Fig 5
Fig 6
Fig 3
(a)
Note the two
keyways