National Cash Register Class 500, User Manual

Page: 14 / 22

Page 14
Directions for Electrically Operated Registers
It is advisable to first operate the register by means of the handle before making the electric
connection. This is advised to enable the user to become familiar with the various devices and
operations as described in this book.
When operating register electrically, remove handle and put in its place handle stud collar and
replace screw. I
To Connect the Registers with the Electric Current
Remove an incandescent lamp from a current socket and screw in the current tap which is
attached to the cord on the register.
Turn the key in the socket ON. The register is then ready to operate by the motor.
To make registration: Press amount keys representing the transaction you wish to register, set
the multiple-counter lever, then any key in the fifth bank (this key starts the motor).
Should it be desired to operate the register with the handle, turn OFF the key in the lamp
socket. This is advised when putting in check or detail paper.