National Auto Tools NSS8XLT, Installation Manual

Page: 2 / 13

2
ATTENTION
By following the instructions in this manual you can save
yourself much time, frustration and money. The installation of
your lift will take 4-5 hours. Do not rush. It is better to spend
a few extra minutes and do the job right. If you will avoid the
following common mistakes your lift will go together easily
and serve you well for many years.
1. Do not attempt to use the power unit to extend your
cylinder. This must be done manually.
2. If you do not know how to wire your motor, get
professional help.
3. Make sure all cables are on pulleys before operating your
lift.
4. Always lower your lift onto the safety locks; this will
protect your power unit. Your power unit will not raise a
car while the pump is loaded.
5. Before using your lift, lubricate the inside of the four
columns. WD-40 or spray silicate works best.
6. Do not over tighten the hydraulic fittings.
We have sold over 25,000 of these style lifts. These six things
are the most common mistakes people make. If you will
follow your manual and avoid these pitfalls, you will be proud
of your lift.