13
Step 12 (cont.)
Non-drywall application
Mark it
Chose your desired location on the wall, have your
friend hold the table in place and use a pencil to
mark where the anchors will go.
1/4” Drill bit
Move the table to the side and following the marks you
just made, with a 1/4” drill bit, drill 2 holes into the wall.
Insert the anchors
Go ahead and tap the wall anchors into place in the new
holes that you just drilled.
If you’re feeling strong, just go ahead and push it in.
All about the angle
Insert 1 screw through each metal bracket and
into the wall anchor. Tilt your phillips head
screwdriver, and secure but do not over tighten.
11
9
11
