NATHAN JAMES Bonnie 74201 Assembly Instructions Manual Download Page 19

19

We want your Bonnie Media Unit to last as long as possible, so we recommend 
that you tighten the screws 2 weeks after assembly and for added safety 
check the tightness of all screws every 2 months.

For proper care and treatment please check our website  
at 

NathanJames.com/products

DO NOT 

use for commercial purposes

DO NOT 

frolic on media unit

DO NOT 

use media unit as foot stool

DO NOT 

leave spilled liquid on media unit

DO NOT 

use media unit if damaged

DO NOT 

make temporary repairs

DO NOT 

use outdoors

Proper use

Safety first, fun later

Safe use of this product 

starts with you.

Use this Bonnie Media Unit responsibly with 
the primary concern for your safety. Follow 
assembly instructions carefully and inspect 
product upon receipt and each use.

Nathan James and its parent companies cannot  
be held legally responsible for any injuries or 
death resulted from failure to follow instructions 
or improper use of this product.

Do not modify the 

structure of this  

product in any way.

Our products have been tested to meet specific 
safety measures as they were originally 
intended to be sold. Any modifications will 
present the risk of creating significant safety 
issues which NJ will not be responsible for.

Summary of Contents for Bonnie 74201





















Reviews: