Naterial Menorca, Assemby - Use - Maintenance Manual

Page: 49 / 52

EN
49
We recommend using the product packaging as a surface for setting up the product in order to avoid damage (scratches, paint stains, dirt...). Before
finishing setup, we also recommend not tightening the screws too much and leaving a bit of play for each element. Once setup is completed, please
make
sure that all screws are firmly tightened. This product must be placed on a stable surface. Two adults are needed to complete the setup of this product.
This product is intended for home and non-business use outdoors. Keep this product away from flames or direct heat sources such as outdoor heaters
and
BBQ grills. If the product has folding parts or extensions, close them each time before transporting.
We recommend regular maintenance of your product.
In case of not using the product for an extended period of time, please remember to cover it. Continuous exposure to weather elements may accelerate
deterioration of the product. Using floor pads helps protect the product from humidity and prevents damage to the floor on which the product is placed
(scratches, stains...). Please protect your pad or your cushion from weather elements. If the product contains wood, its appearance may show some
rough aspect and color changes over time. There are two solutions: let the wood age naturally or oil the wood to preserve its colour and restore its
shine
(annual maintenance required).
Cleaning
If you use a cleaning product, it can be applied using a non-abrasive sponge with a mild soap and hot water. Follow closely the instructions provided
with the such products and check to ensure they are compatible with your product. If the product has some fabric element, please follow the
care instructions on its label. If your pad or cushion cover is removable, please follow the washing instructions indicated on
the label. Wipe the product, especially the flat surfaces, after each rain or snow event. To remove dirt or stubborn
stains, an alcohol-based glass window cleaner can be used on the metal.
Fastenings
For better stability and for your safety, tighten the screws once again around two weeks after setup. Tighten the screws also at least
once a year for a long-lasting maintenance.
Repair
In case of paint chipping off, the affected part must be cleaned and repainted in order to avoid formation of rust.
2. SETUP
4. CARE AND MAINTENANCE
3. USE RECOMMENDATIONS