PROGRAMMING RELAY 1
1.
Call the Extension Number of RCU-SIP
You will hear 1 ‘Beep’ after answer
2.
Then Press
##
on your keypad
You will hear 3 ‘Beeps’
Do not proceed until you have heard 3 short beeps.
If you do not hear 3 beeps, return to the start.
3.
PRESS
#1
to program Relay 1
You will hear 1 ‘Beep’
4.
Enter the
NUMBER of DIGITS
for your Relay Code
(press 1, 2, 3 or 4)
You will hear 1 ‘Beep’
5.
Enter the
DIGITS
of your Relay Code
You will hear 1 ‘Beep’
6.
Enter the
CLOSURE TIME
of your Relay
(01-99 or 00)
For a successful programming of your Relay
You will hear 3 ‘Beeps’
For an Error in programming
You will hear 1 Long ‘Beep’
If you experience an Error, wait until RCU-SIP hangs up, then Start again at 1
If your programming is accepted, Hang Up or Continue Programming
Write down your Relay Code Here : ---------- ---------- ---------- ----------
Write down your Relay Time Here : ----------
