Precautions in use
Please follow the following matters:
Please use a soft cloth with water to wipe
the main body, seat, and seat cover.
Please do not install in direct light.
- It may lead to product discoloration, breakage, and
remote control failure.
Avoid splashing urine on the main body or spout.
- This may cause malfunction.
Do not cover the touch base sensing area and remote
control sensing area.
- This may cause the touch base induction and remote
control to malfunction.
Please disconnect the power when not in use for
a long time.
Please turn off the main power during thunderstorms.
- Not turning it off may result in a lightning strike, causing
personal injury or equipment failure.
Radio and other street ports should be used at a
certain distance from this product.
-
This may make noise from the radio.
Do not lean the upper body against the seat cover
when using.
- This may cause defects or breakage of the seat cover.
WEEE Guide
When disposing of products or parts of products as waste, please separate them and dispose of them separately.
In order to prevent damage to the environment and human beings, it is recommended to separate and recycle
resources and reuse them.
Consumers should contact the point of sale where the product was purchased or government
agencies to confirm how to recycle environmentally.
Industrial users should contact the supplier of the product to confirm the purchase conditions.
This product should be disposed of separately from other industrial waste products.
The correct way to use
Use the power saving function
Set the power-saving state, and the seat
temperature is maintained at about 28 ℃.
When there is someone on the seat in the
power-saving state, the power-saving state
is automatically lifted, and the normal
temperature control state is carried out.
Automatic standby
In no operation, no seat temperature, no
seat state, the machine automatically enters
standby mode after 3 minutes. The display
and knob lights go out.
Please close the seat cover
Close the seat cover can prevent the seat
surface heat to the outside and thus save
electricity.
How to use the foot sensor function
There is no operation away from the seat
state, the foot sensor senses an object
blocking the sensing area, and the buzzer
"tick "performs a flush action.
Must comply
Please use tap water for water supply, do not use other water sources other
than tap water that do not meet sanitary standards.
- It will cause inflammation of the cleaning area or equipment failure.
Befor
e use
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH
