2
+
+
+
+
4.
To listen to the selected sounds, place the
ear pieces in ears angled in a forward
position. Place the diaphragm of the
SmartScope™ over one of the appropriate
sites on the manikin. (See diagram on pages
4 & 5.)
5.
As an alternative, an amplified speaker
(LF01189U, included with LF01172U) can be
used, allowing an entire classroom to hear
at the same time. To connect the speaker,
plug the speaker cord into the speaker jack
on the top of the SmartScope™ box. (See
figure 2.) When a speaker is connected
to the SmartScope™, the ear pieces will not
work. Place the diaphragm of the SmartScope™
over the appropriate sites on the manikin.
(See diagram on pages 4 & 5.)
6.
Colored dots are included with the torso to aid
with teaching.
Care and Maintenance
•
Clean torso when needed using Nasco
Cleaner (LF09919U).
•
Store in hard carry case in a temperature
controlled environment, avoiding extreme hot
or cold temperatures.
•
Replace batteries regularly for optimum working
condition.
•
It is recommended that batteries are removed
when not in use.
•
Avoid getting ink on torso simulator or practice
boards. Ink will transfer indelible stains.
Troubleshooting
•
When preparing to use your SmartScope™
and remote, use batteries that are fully
charged and installed correctly. (See figure
3.) The SmartScope™ is not equipped with a
power button; this may drain the useful life of
your batteries.
•
D
ue to frequency changes, Adult Auscultation
Trainer SmartScopes™ with serial numbers
0
to 4999
are only compatible with remotes
with serial numbers
0 to 4999
. SmartScopes™
with serial numbers
5000 and up
will only
work with remotes with serial numbers
5000
and up
. The serial numbers are located on
the back of the device and are handwritten in
ink. (See figure 4.)
Figure 2
Figure 3
Figure 4
NP030_00_LF01142_LF01172_AuscultationSmartScope.indd 4
4/13/17 3:22 PM
