RW-91 – Service Manual
Hints:
- To get a perfect rewinded roll when printing batches of labels some points are
suggested
if possible. However the rewinder makes a good job without these proposals.
- In printers Setup use no “negative startadjust”. This will avoid retracting the
label before printing.
- Check also in the Setup with Normal speed if printer still stops for each label.
Hexagon grub screw
Bobbin
Specification:
Bobbin
length,
125mm
Label
roll
size,
38-180mm
Bobbin
paper
core
size 38-42mm
Dimensions:
L
180mm
W
210mm
H
200mm
Weight
1.4kg
Power:
Supply
the
Rewinder
from separate adapter either
18V/DC 15W, 800mA or 24V DC.
(2 pole female chassi plug, length 12mm, outer 5,5mm, inner 2.1mm)
Powering from printer is not recommended.
