NASA WS300 User Manual Download Page 11

4 - SETTING THE ALARM

- Press the (MODE) button twice to display the alarm (AL) and then press this button again for 2 

seconds to set it.

- The first data to be set is the time.

- Use the (UP) and (DOWN) buttons to adjust the values. Hold the buttons down to speed up the scrolling.

- Press the (MODE) button to confirm and then move to the next data setting whose display will flash.

- The setting order is as follows: hour → minute → repeat interval (1-20 mins, default is 5 mins)

- At each setting, use the (UP) and (DOWN) buttons to adjust the values and press the (MODE) button 

to confirm.

- If the buttons are not pressed within 8 seconds, the unit automatically exits the date and time setting 

mode and saves the last selected values.

ACTIVATING / DEACTIVATING THE ALARM

- Press the (UP) button to activate (     ) or deactivate the alarm (no symbol is displayed).

STOPPING THE ALARM

- The alarm is triggered at the programmed time and sounds as follows:

• 0-10 seconds: 1 BEEP per second

• 10-20 seconds: 2 BEEP per second

• 20-30 seconds: 3 BEEP per second

• beyond 30 seconds: continuous BIP 

- To stop the alarm, press the (UP) button; it will sound again the next day at the same time.

SNOOZING THE ALARM (SNOOZE)

- When the ring sounds, press the (SNOOZE) button if you want to delay it: the (     ) symbol 

flashes and the alarm stops. The alarm will sound again after the repeat interval set in the alarm setting. 

- Then press the (UP) button to deactivate the alarm snooze.

5 - COMFORT LEVEL

Here is the meaning of the different comfort levels: 

- HUMI (= humid): humidity above 70%

- GOOD (= comfort): indoor temperature between 20°C-28°C and humidity between 40% - 70%

- DRY (=dry): humidity below 40%

6 - BACKLIGHTING

- If the weather station is plug into a power source with the supplied USB cable, the screen backlight will 

be constant.

- If it is powered by batteries, the screen backlight is turned off to save energy. It is necessary to press the 

(LIGHT) button to activate it for 5 seconds.

7 - CLEANING AND MAINTENANCE

- Before cleaning the unit, disconnect the power supply.

- Only clean the outside of the unit and use a dry cloth. Do not use cleaning fluids to avoid damaging 

the electronics.

3 - SETTING THE DATE AND TIME

- Press the (MODE) button once to display the time and then press this button again for 2 seconds to 

enter the date and time setting mode.

- The first data to be set is the year (YYYY yr).

- Use the (UP) and (DOWN) buttons to adjust the values. Hold the buttons down to speed up the scrolling.

- Press the (MODE) button to confirm and then move to the next data setting whose display will flash.

- The setting order is as follows: year (YYYY) → month (MM) → day (DD) → time format 

(12H/24H) → hour → minute

- At each setting, use the (UP) and (DOWN) buttons to adjust the values and press the (MODE) 

button to confirm.

- If the buttons are not pressed within 8 seconds, the unit automatically exits the date and time 

setting mode and saves the last selected values.

Summary of Contents for WS300


















Reviews: