NASA electric NS-3076, Manual

Page: 17 / 29

NS-3076
Multi-Functional Pressure Cooker
12
immersing the device in water or any other
liquid; This can lead to fire, electric shock,
electric shock and burns.
3.
After each use of the pressure cooker, take
out the water collection housing and clean it.
4.
Remove the inner cover, leak-proof
washer, and removable steam drain valve
from the lid and rinse with water and detergent.
5.
Wash the cooking pot with a soft sponge,
water and detergent.
6.
Check the safety valve and clean it
carefully.
7.
Dry all parts with a soft cloth after washing
and make sure they are dry before packing.
Product storage and maintenance
• Before repack the product, make sure that
the parts and the body of the device are dry.
• Please repackage the device after finishing
work and place it in a dry place away from
wet.
Troubleshooting
Problem Possible cause Solution
Device lid is difficult to
close.
The leaking washer or
cooking pot is not in place
properly.
Replace the leak washer or
cooking pot correctly.
The safety valve is blocked. Check the safety valve and clean
if it clogs.
Device lid is difficult to
open.
The safety valve or steam
evacuate valve is blocked.
Check the safety valve and the
steam evacuate valve and open
the blocked vents. If the holes do
not open, contact NASA Electric
After-Sales Service.
There is steam pressure
inside the pressure cooker
housing.
Wait for the steam pressure to
decrease, then open the device lid.
Water leaks from the
inner lid.
Steam evacuate valves
or safety valves are not
installed in place.
Install the steam evacuate valve or
safety valve in place.
Leaking washer is worn. Replace the leaking washer.
Steam evacuate does
not stop.
The steam evacuate valve is
in the open position.
Close the steam evacuate valve.
Technical specifications
1000 W Power
50 Hz Frequency
220-240 V Voltage
General specifications of device
Capacity 6 L
Work pressure 0-70 KPa
Limited pressure 90 KPa