14
NARVON
ALARMS
decimal point is being shown.
reading refers to the tank 1 (see Fig.2 Page 4).
Note: If while using machine, the temperature
display should switch off suddenly, to start
it again press the . key. If the temperature
display should not switch on again, switch
off the machine and contact your nearest
assistance center.
Important: While using the machine, the
temperature display must always be on so
as to show the temperature of the product in
the tanks.
6.5. Adjusting slushy consistency
+: thicker
consistency, -: thinner consistency.
The adjustment may be made by hand or
with the aid of a suitable flat-tip screwdriver.
The machine comes straight from the factory with the valve
and minimum (D) consistency points.
If you wish to raise the consistency of the product all that is
maximum consistency).
If you wish to lower the consistency of the product all that is
needed is to turn the valve counterclockwise (right). We can
(point of minimum consistency).
Fig 16
1 TANK
Decimal point
2 TANKS
Decimal point
3 TANKS
Decimal point
D
E
(2)
Fig 17
Fig 18
Fig 19
