background image

14

NARVON SUMMIT

The display warns about the possible problems. The alarm remains on the screen until the problem is solved.

WARNING LABELS

ALERT

SOLUTION

HIGH TEMPERATURE: DIRTY FILTER

Clean filter.

VOLTAGE ERROR

Some issue with electrical network.

LEFT PROBE ERROR

Disconnected probe or malfunction, left bowl sensor.

RIGHT PROBE ERROR

Disconnected probe or malfunction, right bowl sensor.

COND . PROBE ERROR

Disconnected probe or malfunction, condenser sensor.

LIGHT ERROR

Go to light menu and switch on the lights.

Some parts of your machine must be replaced every six months and periodically (at least once a year/every twelve months) 

by a specialized technician. This periodic maintenance is required in order to keep your machine running at peak condition. 

Without maintenance, your machine's components can become worn or even defective. In case a component is worn, it 

must be replaced by a new original spare part. 

 

It is forbidden to use the machine when only one of its components is defective or worn.

Note:

 

6 and 12 month maintenance kits must be purchased to ensure the longevity of your machine.

Shaft Gasket

Tap Seal

Bowl Seal

Shaft Gasket

Bushing & Gasket

Bushing & Gasket

These parts must be replaced every 6 months: (Use 378NSMAINT6)

These parts must be replaced every 12 months: (Use 378NSMAINT12)

MAINTENANCE

Summary of Contents for 378NSSM2























Reviews: