![background image](http://html1.mh-extra.com/html/narvi/softy-4-5kw/softy-4-5kw_installation-and-operating-instructions-manual_3343533017.webp)
7. CONSTRUCTION OF THE STEAM ROOM:
- The steam room must be well insulated, especially the ceiling, through which most
of the steam escapes. Because of the humidity, it is recommended the insulation
be covered with a moisture resistant material, for instance aluminum foil.
Wood must always be used to panel the walls.
8. PROTECTIVE BARRIER:
- A protective barrier may be built around the stove if necessary. In this case,
you should definitely adhere to the minimum clearances from structures made
of flammable materials.
9. IMPORTANT ADDITIONAL INSTRUCTIONS:
- You should be careful in the vicinity of the hot stove, because the stones and
metal parts of the stove may cause burns.
- Only a small amount of water should be throw on the stove stones, because
the steaming water is scalding hot.
- This equipment is not to be used by children or people whose physical and
psychological traits, mental functions, lack of experience or knowledge may hinder
the safe operation of the equipment, if the person who is responsible for safety
cannot supervise them or instruct them in the use of the equipment.
- Children may not be left unsupervised and they should be supervised to make sure
they do not play with the equipment.
- Always inspect the steam room before plugging in the stove.
- The improperly filed stone container is a fire hazard.
- Covering the stove will cause a fire hazard.
When measuring the insulation barrier of the stove, some leakage may occur, which is
caused by the humidity that has seeped into the insulation material during transport
or warehousing. The moisture will evaporate after the stove is heated a few times.
Do not connect the power supply for the electric stove through a fault current protection!
10. CONNECTION SCHEME:
B2
B1
A2
A1
F
E
D
C
B
A
A2
Blue
Red
Yellow
W
hite
B2
A1
θ
B1
-t°
Pink
Grey
Blue
Yellow
Green
Brown
5
3
2
1
4
6
Sensor
Indicator
CONTROL OF THE ELECTRIC HEATING
L2
L1
400V 3N~
N
L3
U
N
X3
X2
X1
Control scheme
2
On/off switch