BEFORE YOU CONNECT THE SAUNA STOVE ALWAYS CHECK THE STEAM ROOM.
7. HOW TO USE THE CLOCK SWITCH:
- The clock switch is on the lower part of the sauna stove. It can be used both for
switching on and as a timer. The warming time desired, 1-4 hours, or a preselected
time, 1-4,5 hours, can be adjusted with the clock switch.
Functional example:
- When switching to number 2 on the light area of the scale, the sauna stove is
immediatelly connected to function and this function will end in 2 hours.
- When switching to number 4 on the black area (the preselection area), the sauna
stove is connected to function in 4 hours. The stove will then be switched on for
about 4 hours.
- The function of the sauna stove can be ended by switching counter-clockwise
to position 0.
8. TEMPERATURE REGULATOR:
- The temperature regulator is on the lower part of the sauna stove. The temperature
desired in the sauna can be selected using the regulator. The broadening line on
the scale shows the rising temperature. When switching clockwise, the temperature
is rising and, when switching counter-clockwise, the temperature is falling.
- The sauna warms up most rapidly by switching the temperature regulator to the
max. position.
- The size of the sauna, the starting temperature, the thermal insulation, the non-
insulated surfaces and how the stones have been piled effect how soon the sauna
warms up.
9. TEMPERATURE RESTRICTOR:
- If the temperature in the sauna is rising dagerously
high the temperature regulator switches off the stove.
The temperature regulator can be switched on again by
pressing a blunt tool in the hole with a diameter of
3 mm at the end of the electrical box (Figure 8).
- If the sauna stove does not start functioning again,
check if the clock switch has been switched off and
the fuses of the stove on the fuse board have not
blown.
- If the sauna stove does not warm up after these
measures please contact the service department.
Figure 8.
10. AIR CONDITIONING IN THE SAUNA:
- The air concitioning in the sauna must be arranged as effectively as possible to get
sufficiently oxygen and fresh air. The best way is to direct fresh air near the sauna
stove (not closer than 50 cm).
- The ventilating air pipe must be equipped with an adjustable valve.
- The size of the bleed valve must be twice as big as the fresh air valve. The bleed
valve can be installed on the wall opposite the sauna stove at least 20 cm higher
than the fresh air valve.
Summary of Contents for NM 450
