NARGESA MX340G, Instruction Book, Page: 9 / 40

- 11 -
IRONWORKER MACHINE MX340G
4. INSTALLMENT AND STARTING UP
4.1. Location of the machine
Try to place the machine at first properly so it doesn ’ t have to be moved, if not then follow the steps descri-
bed in the transport section (nº2). The surface to put the machine on must be flat and leveled to avoid vi-
brations and movements while it is performing. It is possible to get the machine fixed by using hinges, since
it is provided with a lower base or stand with 4 perforations as shown in the
picture 8.
Picture 8. Description of the clamping holes to fix the machine
4.2. Dimensions and working site
When placing the machine it is necessary to take into account its size and dimensions, the operative wor-
king area and the different lengths of the parts to be worked.
The machine will be only used by one worker at the time, and he will be located at the front part of the ma-
chine, never on the side because he has to control the rest of the machine and the main protections are
designed for the frontal use of the machine.
Picture 9. Operative ’ s working area
4.3. Admissible outer conditions
- Temperature b5ºC and +40ºC without overpassing an average temperature of +35ºC during 24
hours
- Humidity between 30% and 90% without water condensation.