NARGESA MT500 A, Instruction Book

Page: 7 / 48

INSTRUCTIONS BOOK OF FORGING TWISTING MACHINE MT500 A 6
The second zone is the tooling area, to the right of the drive, where we make shapes by using a rotary
drive and a fulcrum.
1.6. Description of the machine
The machine is equipped with a 5 HP engine and the reductor which transmits rotation to the head by
means of a cog wheel.
It has a box to keep the tooling and a stand table made of a welded and folded steel plate.
1.7. Description of accessories
The basic accessories the machine has are the ones to fit the head to make the different shapes. It is
provided with different stand points, and clamping spots for materials. In the last chapter of this manual
there are a series of operations all of them explained step by step by means of photographs.
1.8. Description of safety devices
Gears and moveable parts are covered with the exception of the rotary head.
Engine power
Three-phased tension
Rotary speed
Twisting maximun capacity
Bending Maximum capacity
Max. scrolling & bending in flat bar
Max. Continued scrolling length
Dimensions
Weight
4 KW / 5,5 CV
230 / 400 V
4 r.p.m.
40 mm o 1 3/8”
25 mm o 1”
50x10 mm o 2”x3/8”
1.620 mm
2220x980x1280 mm
1350 Kg