NARGESA H3, Instruction Book

Page: 21 / 34

- 20 -
GAS FORGE H3
5.7. First set up of furnace
For the first start-up of Nargesa gas furnaces, the automatic ignition provided is not used. We will use an
external device to light the burner flame. For example a long lighter or a blowtorch.
* The Adapter (C) for the gas bottle is not supplied with this furnace, since each country uses different
adapters. The Adapter will have to be equipped with a left 21.8 male thread. (L)
To proceed to the propane furnace ignition we will follow the following steps:
1. Check that the Gas Valves (A)
are completely closed.
3. Connect the pressure
regulator to the * Adapter (C),
and this to the gas bottle.
2. Check that the combustion
chamber (B) is cleared off
from any element.
4. Verify that all gas connections
between the bottle and the oven
are connected correctly and that
there are no leaks. 6. Open Gas Valve 1, a few
degrees. 5. Check that the working
pressure of the gas is between
0.2 and 0.5 bar.
7. Press the thermocouple
button ( )
9. When the burner ignites, wait
20 seconds and stop pressing
the Thermocouple button. 8. Turn on the gas that comes
out of the burner.
Important:
never put your hands in the
combustion chamber to ignite
the gas.