NARGESA 2021-1660, Instruction Book

Page: 15 / 40

- 17 -
IRONWORKER MACHINE MX340G
5.7. Desactivation of the machine
Any time that the activated machine is in rest position, you can deactivate it. If you wish so, please press
the key OFF and the machine will deactivate and will go to the StandBy mode
(See section 5.2).
5.8. Unusual performance situations
An unusual performance situations may happen any time, it implicates to stop any operation that is being
carried out at the moment.
Unusual situations are divided into two big groups, Emergency situations and Error situations. Causes that
lead to both groups are specified below.
Situations of emergency:
Activation of the Emergency Stop.
Figura 21. Information about the Emergency Stop
Error Situations:
Error inthe Upper Route End of the machine.
Figura 22. Information about the Error in the Upper route end
Error in the Lower route End of the MX340G.
Figura 23. Information about error in the Lower Route End
EMERGENCY STOP
ERROR IN THE
UPPER ROUTE END
VERIFIES THE TURNING
DIRECTION OF THE ENGINE