nardi SUNSTORM SFH600, Use And Maintenance Manual

Page: 21 / 64

23
03.03 Workstation
The machine does not have a fixed work station and is connected to a operating machine.
03.04 Machine Identification
The model and serial number are printed on the plate located on the left side of the frame, in the area shown in the
figures.
For any communication with the manufacturer or service center, always give the model, the serial number and the year
of construction of the header on the nameplate.
Figure 2.4: Position of the identification plate, rear view of the bar
03.05 Noise level emitted by the machine
From controls carried out in the proximity of the machine, noise level is lower than 85 dB (A).
The value of the noise of the machine during work depends from the crop type/condition and from the place where the
machine is installed.
Please check the noise emitted by the machine during the work and according to the results obtained, you must take
the appropriate precautions, in accordance with governmental regulations.
UK