nardi LVR 12 E Instructions For Use And Maintenance Manual Download Page 7

6

Installing the drain hose

-

The  height  of  the  drain  hose  location  must  be  80  -  100  cm.  Lock  the 

drain hose against displacement by locking it into the clip on the back 

of the washing machine.

-

Secure the drain hose at the end with a fixing hook to prevent it f r o m  

shifting and overflowing.

-

It is not recommended to extend the drain hose. If this is unavoidable, 

contact a qualified service organization. The hose extension should not 

exceed 250 cm (longer extensions could lead to back suction).

Note: Do not immerse the drain hose in water, securely fasten it and check for leaks.

Connection to the power grid

Before connecting to the mains, check:

-

Suitability of the socket in relation to the maximum power of the appliance (for safety reasons, the 

circuit fuses should be set to a minimum of 13 A).

-

The voltage must correspond to the voltage indicated on the type plate of the appliance.

-

Compatibility of the appliance plug and socket.

APPLIANCE 

CONTROL PANEL E

- Washing program selector

Turn the washing programme selector 
c l o c k w i s e / c o u n t e r c l o c k w i s e   to select the desired programme (see 
the Programme Selection Guide for more information).

Please note: The washing programme selector is also the on/off knob, if you turn the selector out of position
"0", the appliance is switched on.

- Start/pause button

Summary of Contents for LVR 12 E



















Reviews: