5
•
Remove the transport screws (Fig. 2) b e f o r e use! The transport screws
are only used to protect the appliance components during transport.
FIG. 2
Before using:
1. remove the back cover,
2. remove the three transport screws from the back of the rear
cover and remove the plastic hose,
3. put the back cover back on;
4. insert plastic plugs into the holes left by the transport screws.
Note
:
Store the transport screws and plastic hose in a safe place for future
use.
•
Appliance levelling
FIG. 3
In cooperation with another person, replace the adjustable feet of the
appliance with the four long feet supplied with the appliance. Be sure to
secure them with the locking screws on each leg. The feet should then be
adjusted so that the appliance is balanced horizontally and at the correct
height (remember to calculate the height with the supplied decorative
cover) as shown in Figure 3.
•
decorative cover is installed using screws in the holes on the top edge of
the appliance (Fig. 4).
FIG. 4
•
Fixing the
door
and magnetic lock
FIG. 1
-
Fit the door with hinges and tighten the magnetic lock screws into the
front of the appliance door (Fig. 1).
•
Installing the supply hose
-
Attach the nut of the supply hose to the water supply connector and tighten thoroughly.
Supply hose nut
Water connection connector